Surefire Tips for Faster Boot Time


"Time is money" – a bit of a thing, this is truly true in a fast-paced world like us. Patience may claim to be a virtue. However, in generations that can do a lot of things instantaneously, this word is actually out of context. No matter how short it is, there is a delay of a few minutes, but this is a time that may have been exhausted. Indeed, people in modernized and industrialized world tend not to be more patient than their ancestors. There is nothing annoying for a busy employee than a computer that you take years. To reduce your stress, here are some tips to reduce boot time.

The most common solution to the above problem is to adjust the computer settings.

Setting of "BIOS"

BIOS is software common to all PCs. This software is essential for all computers because it is responsible for initializing and testing the hardware components of the system and loading the operating system (OS) of the computer from the hard disk.

However, if you are certain that the hardware components are working perfectly, you do not need to do such a test. Instead, you can load the operating system as soon as you adjust the BIOS and open it once. To do this, first shut down or put the computer into hibernation. As soon as the screen loads, press the suggested key to enter the BIOS screen (usually "DEL, F2 or F10"). When this is done, go to the "Quick Boot" option and move the hard disk to the top of the boot list. This instructs the computer to immediately load the OS and look for other components such as a CD drive or universal serial bus (USB). Then go to the [終了] option and select [変更を保存]. In rare cases, if you need to boot from a CD or flash drive, you need to reenter the BIOS screen and edit the boot priority list before booting.

Set the program to be started at startup

Usually, when you start up, a series of predefined programs will be executed. Among them, there are things actually not necessary. In order to save time, you can edit the settings to load only essential programs at startup. To do this, click the start button and enter "execute" in the search bar. Open the executable program, type msconfig and press Enter. This command opens the System Configuration Utility. Please select the startup tab of the above utility and uncheck all programs not normally used. However, please note that you may uncheck the programs that are necessary for the computer to operate normally.

Configure the Windows service to be executed at startup

Unlike the general idea, when you delete a specific Windows service using the System Configuration Utility, it is actually the boot time. However, rather than completely removing unnecessary services at startup, you can save time by delaying it. To do this, click on the "Start" button and enter "Run". When you enter the command services.msc, a list of Windows services is displayed. Right-click the service you want to delay and click [プロパティ]. In the [プロパティ] window, the drop-down list labeled "19459009" is displayed and automatic (delayed start) is selected.

Delete unused fonts

The amount of fonts installed on your computer should also load your computer. This is because when Windows starts, it needs to read all the fonts installed on the system. Therefore, the more fonts, the longer it takes to load the system. To remedy this, simply delete the fonts that you do not normally use. This can be done by clicking the [スタート] button and selecting [コントロールパネル]. Click "Appearance" and open the Fonts folder. You can find the fonts installed on your computer. Just click on a font you do not use and click "delete" with the option displayed at the top of the list. This computer works properly with 1,000 installed fonts. However, we recommend that you only have 300 to 500 fonts. However, fonts such as Trebuchet, Verdana, Arial, Tahoma, Times New Roman, Courier New, and MS Sans Serif are required in the system and need to be kept in caution.

Facebook Comments